Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 434)

show dot1x
15-10 Security Configuration
show dot1x
Use this command to display 802.1X status, diagnostics, statistics, and reauthentication or
initialization control information for one or more ports.
Syntax
show dot1x [auth-diag] [auth-stats] [port [init | reauth]] [port-string]
Parameters
Defaults
If no parameters are specified, 802.1X status will be displayed.
If port‐string is not specified, information for all ports will be displayed.
Mode
Switch command, read‐only.
show eapol 15-16
set eapol 15-17
clear eapol 15-18
For information about... Refer to page...
auth‐diag (Optional) Displays authentication diagnostics information.
auth‐stats (Optional) Displays authentication statistics.
port init | reauth (Optional) Displays the status of port initialization and reauthentication
control for the port.
port‐string (Optional) Displays information for specific port(s). For a detailed
description of possible port‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 4‐1.