Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 110)

show port counters
4-6 Port Configuration
Mode
Switch command, read‐only.
Examples
This example shows how to display all counter statistics, including MIB2 network traffic and
traffic through the device for
ge .3.1:
D2(su)->show port counters ge.3.1
Port: ge.3.1 MIB2 Interface: 1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets
0
In Unicast Pkts 0
In Multicast Pkts 0
In Broadcast Pkts 0
In Discards 0
In Errors 0
Out Octets 0
Out Unicasts Pkts 0
Out Multicast Pkts 0
Out Broadcast Pkts 0
Out Errors 0
802.1Q Switch Counters
----------------------
Frames Received
0
Frames Transmitted 0
This example shows how to display all ge .3.1 port counter statistics related to traffic through the
device.
D2(su)->show port counters ge.3.1 switch
Port: ge.3.1 Bridge Port: 2
802.1Q Switch Counters
-----------------------
Frames Received 0
Frames Transmitted 0
Table 4‐12 provides an explanation of the command output.
Table 4-12 show port counters Output Details
Output Field What It Displays...
Port Port designation. For a detailed description of possible port-string values, refer to
“
Port String Syntax Used in the CLI ” on page 4-1.
MIB2 Interface MIB2 interface designation.
Bridge Port IEEE 802.1D bridge port designation.