Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 197)

show spantree stats
D-Series CLI Reference 6-5
show spantree stats
Use this command to display Spanning Tree information for one or more ports.
Syntax
show spantree stats [port port-string] [sid sid] [active]
Parameters
Defaults
If port‐string is not specified, Spanning Tree information for all ports will be displayed.
If sid is not specified, information for Spanning Tree 0 will be displayed.
If active is not specified information for all ports will be displayed regardless of whether or not
they have received BPDUs.
Mode
Switch command, read‐only.
set spantree protomigration 6-24
show spantree spanguard 6-24
set spantree spanguard 6-25
clear spantree spanguard 6-26
show spantree spanguardtimeout 6-26
set spantree spanguardtimeout 6-26
clear spantree spanguardtimeout 6-27
show spantree spanguardlock 6-27
clear/set spantree spanguardlock 6-28
show spantree spanguardtrapenable 6-28
set spanstree spanguardtrapenable 6-29
clear spanstree spanguardtrapenable 6-29
show spantree legacypathcost 6-30
set spantree legacypathcost 6-30
clear spantree legacypathcost 6-31
For information about... Refer to page...
port port‐string (Optional) Displays information for the specified port(s). For a detailed
description of possible port‐‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 4‐1.
sid sid (Optional) Displays information for a specific Spanning Tree identifier. If
not specified, SID 0 is assumed.
active (Optional) Displays information for ports that have received STP BPDUs
since boot.