Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 493)

set ssh
D-Series CLI Reference 15-69
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This example shows how to display SSH status on the switch:
D2(su)->show ssh status
SSH Server status: Disabled
set ssh
Use this command to enable, disable or reinitialize SSH server on the switch. By default, the SSH
server is disabled.
Syntax
set ssh {enable | disable | reinitialize}
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to disable SSH:
D2(su)->set ssh disable
set ssh hostkey
Use this command to set or reinitialize new SSH authentication keys.
Syntax
set ssh hostkey [reinitialize]
Parameters
enable | disable Enables or disables SSH, or reinitializes the SSH server.
reinitialize Reinitializes the SSH server.
reinitialize (Optional) Reinitializes the server host authentication keys.