Set rmon capture, Set rmon capture -21 – Enterasys Networks Enterasys D2 D2G124-12P User Manual
Page 393
set rmon capture
D-Series CLI Reference 13-21
Example
This example shows how to display RMON capture entries and associated buffer entries:
D2(rw)->show rmon capture
Buf.control= 28062 Channel= 38283 EntryStatus= valid
----------------------------------------------------------
FullStatus avail FullAction lock
Captured packets 251 Capture slice 1518
Download size 100 Download offset 0
Max Octet Requested 50000 Max Octet Granted 50000
Start time 1 days 0 hours 51 minutes 15 seconds
Owner monitor
captureEntry= 1 Buff.control= 28062
--------------------------------------------
Pkt ID 9 Pkt time 1 days 0 hours 51 minutes 15 seconds
Pkt Length 93 Pkt status 0
Data:
00 00 5e 00 01 01 00 01 f4 00 7d ce 08 00 45 00
00 4b b4 b9 00 00 40 11 32 5c 0a 15 43 05 86 8d
bf e5 00 a1 0e 2b 00 37 cf ca 30 2d 02 01 00 04
06 70 75 62 6c 69 63 a2 20 02 02 0c 92 02 01 00
02 01 00 30 14 30 12 06 0d 2b 06 01 02 01 10 07
01 01 0b 81 fd 1c 02 01 01 00 11 0b 00
set rmon capture
Use this command to configure an RMON capture entry.
Syntax
set rmon capture index {channel [action {lock}] [slice slice] [loadsize loadsize]
[offset offset] [asksize asksize] [owner owner]}
Parameters
index
Specifies a buffer control entry.
channel
Specifies the channel to which this capture entry will be applied.
action lock
(Optional) Specifies the action of the buffer when it is full as:
•
lock ‐ Packets will cease to be accepted
slice slice
(Optional) Specifies the maximum octets from each packet to be saved in
a buffer. Currently, the only value allowed is 1518.
loadsize loadsize
(Optional) Specifies the maximum octets from each packet to be
downloaded from the buffer. The default is 100.
offset offset
(Optional) Specifies the first octet from each packet that will be retrieved.
asksize asksize
(Optional) Specifies the requested maximum octets to be saved in this
buffer. Currently, the only value accepted is ‐1, which requests as many
octets as possible.
owner
(Optional) Specifies the name of the entity that configured this entry.