Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 242)

clear spantree disputedbpduthreshold
6-50 Spanning Tree Configuration
Mode
Switch command, read‐only.
Example
This example shows how to display the current disputed BPDU threshold:
D2(rw)->show spantree disputedbpduthreshold
The disputed BPDU threshold value is 0
clear spantree disputedbpduthreshold
Use this command to return the disputed BPDU threshold to its default value of 0, meaning that
disputed BPDU traps should not be sent.
Syntax
clear spantree disputedbpduthreshold
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to reset the disputed BPDU threshold to the default of 0:
D2(rw)->clear spantree disputedbpduthreshold
show spantree nonforwardingreason
Use this command to display the reason for placing a port in a non‐forwarding state due to an
exceptional condition.
Syntax
show spantree nonforwardingreason port-string [sid sid]
Parameters
Defaults
If no port‐string is specified, non‐forwarding reason is displayed for all ports.
If no SID is specified, SID 0 is assumed.
port‐string Specifies port(s) for which to display the non‐forwarding reason.
sid sid (Optional) Specifies the specific Spanning Tree(s) for which to display
the non‐forwarding reason. Valid values are 0 ‐ 4094. If not specified,
SID 0 is assumed.