Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 348)

clear logging local
12-10 Logging and Network Management
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This command shows how to enable logging to the console and disable logging to a persistent file:
D2(su)->set logging local console enable file disable
clear logging local
Use this command to clear the console and persistent store logging for the local session.
Syntax
clear logging local
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear local logging:
D2(su)->clear logging local
show logging buffer
Use this command to display the last 256 messages logged. By default, critical failures and user
login and logout timestamps are displayed.
Syntax
show logging buffer
Parameters
None.
console enable | disable Enables or disables logging to the console.
file enable | disable Enables or disables logging to a persistent file.