Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 291)

clear policy profile
D-Series CLI Reference 9-5
clear policy profile
Use this command to delete a policy profile entry.
Syntax
clear policy profile profile-index
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete policy profile 8:
D2(su)->clear policy profile 8
Configuring Classification Rules
Purpose
To review, create, assign, and unassign classification rules to policy profiles. This maps user
profiles to protocol‐based frame filtering policies.
Commands
profile‐index Specifies the index number of the profile entry to be deleted. Valid values
are 1 to 255.
For information about... Refer to page...
show policy rule 9-6
show policy capability 9-8
set policy rule 9-10
clear policy rule 9-12
clear policy all-rules 9-13