Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 380)

show rmon alarm
13-8 RMON Configuration
Commands
show rmon alarm
Use this command to display RMON alarm entries. The RMON alarm group periodically takes
statistical samples from RMON variables and compares them with previously configured
thresholds. If the monitored variable crosses a threshold an RMON event is generated.
Syntax
show rmon alarm [index]
Parameters
Defaults
If index is not specified, information about all RMON alarm entries will be displayed.
Mode
Switch command, read‐only.
Example
This example shows how to display RMON alarm entry 3:
D2(rw)->show rmon alarm 3
Index 3
---------------------
Owner = Manager
Status = valid
Variable = 1.3.6.1.4.1.5624.1.2.29.1.2.1.0
Sample Type = delta Startup Alarm = rising
Interval = 30 Value = 0
Rising Threshold = 1 Falling Threshold = 0
Rising Event Index = 2 Falling Event Index = 0
Table 13‐44 provides an explanation of the command output.
For information about... Refer to page...
show rmon alarm 13-8
set rmon alarm properties 13-9
set rmon alarm status 13-10
clear rmon alarm 13-11
index (Optional) Displays RMON alarm entries for a specific entry index ID.
Table 13-44 show rmon alarm Output Details
Output Field What It Displays...
Index Index number for this alarm entry.
Owner Text string identifying who configured this entry.