Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 150)

clear port lacp
4-46 Port Configuration
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Usage
If you set a port to LACP passive using the command clear port lacp port <port‐string>
aadminstate lacpactive, the command clear port lacp port <port‐string> aadminstate lacptimeout
will also be added to the configuration. If you unset the first command, it will remove the second
command automatically from the configuration file.
Example
This example shows how to clear all link aggregation parameters for port ge .3.16:
D2(su)->clear port lacp port ge.3.16
port port‐string Specifies the physical port(s) on which LACP settings will be cleared. For
a detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 4‐1.
aadminkey Clears a port’s actor admin key.
aportpri Clears a port’s actor port priority.
asyspri Clears the port’s actor system priority.
aadminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync
| lacpcollect |
lacpdist | lacpdef |
lacpexpire | all Clears a port’s specific actor admin state, or all actor admin state(s). For
descriptions of specific states, refer to the set port lacp command (“
set
port lacp ” on page 4‐44).
padminsyspri Clears the port’s default partner priority value.
padminsysid Clears the port’s default partner system ID.
padminkey Clears the port’s default partner admin key.
padminportpri Clears the port’s default partner port priority.
padminport Deletes a partner port from the LACP configuration.
padminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync
| lacpcollect |
lacpdist | lacpdef |
lacpexpire | all Clears the port’s specific partner admin state, or all partner admin state(s).