Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 448)

set macauthentication portinitialize
15-24 Security Configuration
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Usage
Enabling port(s) for MAC authentication requires globally enabling MAC authentication on the
switch as described in “
set macauthentication ” on page 15‐22, and then enabling it on a port‐by‐
port basis. By default, MAC authentication is globally disabled and disabled on all ports.
Example
This example shows how to enable MAC authentication on ge .2.1 though 5:
D2(su)->set macauthentication port enable ge.2.1-5
set macauthentication portinitialize
Use this command to force one or more MAC authentication ports to re‐initialize and remove any
currently active sessions on those ports.
Syntax
set macauthentication portinitialize port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to force ge .2.1 through 5 to initialize:
D2(su)->set macauthentication portinitialize ge.2.1-5
enable | disable Enables or disables MAC authentication.
port‐string Specifies port(s) on which to enable or disable MAC authentication. For a
detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 4‐1.
port‐string Specifies the MAC authentication port(s) to re‐initialize. For a detailed
description of possible port‐string values, refer to “
Port String Syntax Used
in the CLI ” on page 4‐1.