Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 459)

clear multiauth port
D-Series CLI Reference 15-35
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to set the port multiple authentication mode to required on ge .3.14:
D2(rw)->set multiauth port mode auth-reqd ge.3.14
This example shows how to set the number of users allowed to authenticate on port ge .3.14 to 8:
D2(rw)->set multiauth port numusers 8 ge.3.14
clear multiauth port
Use this command to clear multiple authentication properties for one or more ports.
Syntax
clear multiauth port {mode | numusers} port-string
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Examples
This example shows how to clear the port multiple authentication mode on port ge .3.14:
D2(rw)->clear multiauth port mode ge.3.14
This example shows how to clear the number of users on port ge .3.14:
D2(rw)->clear multiauth port numusers ge.3.14
port‐string Specifies the port(s) on which to set multiple authentication properties.
mode Clears the specified port’s multiple authentication mode.
numusers Clears the value set for the number of users allowed authentication on the
specified port.
port‐string Specifies the port or ports on which to clear multiple authentication
properties.