Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 149)

clear port lacp
D-Series CLI Reference 4-45
Defaults
At least one parameter must be entered per port‐string.
If enable or disable are not specified, port(s) will be enabled with the LACP parameters entered.
Mode
Switch command, read‐write.
Usage
LACP commands and parameters beginning with an “a” (such as aadminkey) set actor values.
Corresponding commands and parameters beginning with a “p” (such as padminkey) set
corresponding partner values. Actor refers to the local device participating in LACP negotiation,
while partner refers to its remote device partner at the other end of the negotiation. Actors and
partners maintain current status of the other via LACPDUs containing information about their
ports’ LACP status and operational state.
Example
This example shows how to set the actor admin key to 3555 for port ge .3.16:
D2(su)->set port lacp ge.3.16 aadminkey 3555
clear port lacp
Use this command to clear link aggregation settings for one or more ports.
Syntax
clear port lacp port port-string {[aadminkey] [aportpri] [asyspri] [aadminstate
{lacpactive | lacptimeout | lacpagg | lacpsync | lacpcollect | lacpdist | lacpdef
| lacpexpire | all}] [padminsyspri] [padminsysid] [padminkey] [padminportpri]
[padminport] [padminstate {lacpactive | lacptimeout | lacpagg | lacpsync |
lacpcollect | lacpdist | lacpdef | lacpexpire | all}]}
padminport
padminport Sets a default value to use as the port’s partner admin value. Valid values
are 1 ‐ 65535.
padminportpri
padminportpri Sets a default value to use as the port’s partner port priority. Valid values
are 0 ‐ 65535, with lower values given higher priority.
padminstate
lacpactive |
lacptimeout |
lacpagg | lacpsync
| lacpcollect |
lacpdist | lacpdef |
lacpexpire Sets a port’s partner LACP administrative state. See aadminstate for valid
options.
padminsysid
padminsysid Sets a default value to use as the port’s partner system ID. This is a MAC
address.
padminsyspri
padminsyspri Sets a default value to use as the port’s partner priority. Valid values are 0
‐ 65535, with lower values given higher priority.