Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 169)

Configuring SNMP Access Rights
D-Series CLI Reference 5-15
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete the community name “vip.”
D2(su)->clear snmp community vip
Configuring SNMP Access Rights
Purpose
To review and configure SNMP access rights, assigning viewing privileges and security levels to
SNMP user groups.
Commands
show snmp access
Use this command to display access rights and security levels configured for SNMP one or more
groups.
Syntax
show snmp access [groupname] [security-model {v1 | v2c | usm}] [noauthentication
| authentication | privacy] [context context] [volatile | nonvolatile | read-only]
Parameters
For information about... Refer to page...
show snmp access 5-15
set snmp access 5-17
clear snmp access 5-18
groupname (Optional) Displays access information for a specific SNMPv3 group.
security‐model v1 |
v2c | usm (Optional) Displays access information for SNMP security model version
1, 2c or 3 (usm).
noauthentication |
authentication |
privacy (Optional) Displays access information for a specific security level.
context context (Optional) Displays access information for a specific context. For a
description of how to specify SNMP contexts, refer to “
Using SNMP
Contexts to Access Specific MIBs ” on page 5‐3.