Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 472)

show maclock stations
15-48 Security Configuration
show maclock stations
Use this command to display MAC locking information about end stations connected to the
switch.
Syntax
show maclock stations [firstarrival | static] [port-string]
Parameters
Defaults
If no parameters are specified, MAC locking information will be displayed for all end stations.
Mode
Switch command, read‐only.
Port Status Whether MAC locking is enabled or disabled on the port. MAC locking is globally
disabled by default. For details on enabling MAC locking on the switch and on one or
more ports, refer to “
set maclock enable ” on page 15-49 and “ set maclock ” on
page 15-50.
Trap Status Whether MAC lock trap messaging is enabled or disabled on the port. For details
on setting this status, refer to “
set maclock trap ” on page 15-56.
Aging Status Whether aging of FirstArrival MAC addresses is enabled or disabled on the port.
Refer to “
set maclock agefirstarrival ” on page 15-54.
Max Static Allocated The maximum static MAC addresses allowed locked to the port. For details on
setting this value, refer to “ set maclock static ” on page 15-52.
Max FirstArrival
Allocated The maximum end station MAC addresses allowed locked to the port. For details on
setting this value, refer to “
set maclock firstarrival ” on page 15-53.
Last Violating MAC
Address Most recent MAC address(es) violating the maximum static and first arrival value(s)
set for the port.
Table 15-51 show maclock Output Details (Continued)
Output Field What It Displays...
firstarrival (Optional) Displays MAC locking information about end stations first
connected to MAC locked ports.
static (Optional) Displays MAC locking information about static (management
defined) end stations connected to MAC locked ports.
port‐string (Optional) Displays end station information for specified port(s). For a
detailed description of possible port‐string values, refer to “
Port String
Syntax Used in the CLI ” on page 4‐1.