Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 275)

set diffserv class match
D-Series CLI Reference 8-7
Defaults
None.
Mode
Switch command, read‐write.
Usage
Any policy that is applied must be composed of rules that come from only one of the following
four groups.
• Layer 3:
– Destination IP address (dstip)
– Destination Layer 4 port (dstl4port)
– IP Diffserv Code Point (ipdscp)
– IP precedence field (ipprecedence)
– IP type of service (TOS) field (iptos)
– IP protocol field (protocol)
– Source IP address (srcip)
– Source Layer 4 port (srcl4port)
• Layer 2:
– Destination MAC address (dstmac)
– Source MAC address (scrmac)
– VLAN ID (vlan)
• Layer 2 Layer 3 source:
– Source MAC address (scrmac)
– Source IP address (srcip)
– VLAN ID (vlan)
• Layer 2 Layer 3 destination:
– Destination MAC address (dstmac)
– Destination IP address (dstip)
– VLAN ID (vlan)
b'010xx0 18,20,22 af21, af22, af23 (Assured Forwarding)
b'011xx0 26,28,30 af31, af32, af33 (Assured Forwarding)
b'100xx0 34,36,38 af41, af42, af43 (Assured Forwarding)
b'101110 46 ef (Expedited Forwarding)
Table 8-32 Valid IP DSCP Numeric and Keyword Values (Continued)
Code Point Map Numeric Value Keyword (Usage)