Enterasys Networks Enterasys D2 D2G124-12P - Manual (Page 342)

clear logging server
12-4 Logging and Network Management
clear logging server
Use this command to remove a server from the Syslog server table.
Syntax
clear logging server index
Parameters
Defaults
None.
Mode
Switch command, read‐write.
Example
This command shows how to remove the Syslog server with index 1 from the server table:
D2(su)->clear logging server 1
show logging default
Use this command to display the Syslog server default values.
Syntax
show logging default
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Example
This command shows how to display the Syslog server default values. For an explanation of the
command output, refer back to
Table 12‐36 on page 12‐2.
D2(su)->show logging default
Facility Severity Port
-----------------------------------------
Defaults: local4 warning(5) 514
index Specifies the server table index number for the server to be removed.
Valid values are 1 ‐ 8.