General, Qos mode – Dell PowerEdge VRTX User Manual

Page 425

425

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User

Guide\Plasma_UGQoS.fm

D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY

When the QoS mode is changed, the following occurs:

• When changing from Advanced mode to any other mode, policy profile

definitions and class maps are deleted. ACLs, which are bonded directly to

interfaces, remain bonded.

• When changing from Basic mode to Advanced mode, the QoS Trust mode

configuration in Basic mode is not retained.

• When disabling QoS, the shaper and queue setting (WRR/SP bandwidth

settings) are reset to default values.

All other user configurations remain intact.

General

This section contains the following topics:

QoS Mode

To enable/disable the QoS mode:

1 Click Quality of Service > General > QoS Mode in the tree view to

display the QoS Mode page.

2 Select the QoS Mode. The possible options are:

–

Basic — QoS is enabled in Basic mode on the switch

–

Advanced — QoS is enabled in Advanced mode on the switch.

–

Disable — QoS is not enabled on the switch.