Dell PowerEdge VRTX User Manual
Page 320

320
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_VLAN.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
switchport trunk native vlan {vlan-
id|none}
no switchport trunk native vlan
Defines the native VLAN when
the interface is in trunk mode.
Use the no form of this command
to restore the default
configuration.
switchport general allowed vlan
{add|remove} vlan-list
[tagged|untagged]
no switchport general allowed vlan
Sets the general characteristics
when the interface is in general
mode.
Use the no form of this command
to reset a general characteristic to
the default.
switchport general pvid vlan-id
no switchport general pvid
Configures the PVID when the
interface is in general mode.
Use the no form of this command
to restore the default
configuration.
switchport customer vlan vlan-id
no switchport customer vlan
Sets the port's VLAN when the
interface is in customer mode.
Use the no form of this command
to restore the default
configuration.
switchport mode
{access|trunk|general|private-vlan
{promiscuous|host}|customer}
no switchport mode
Configure the VLAN membership
mode of a port.
Use the no form of this command
to restore the default
configuration.
Table 12-2. Port-to-VLAN Group Assignments CLI Commands (Continued)
CLI Command
Description