Dell PowerEdge VRTX - Manual (Page 350)

350
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Multicast.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
The following is an example of the CLI commands:
Bridge Multicast Forward All
Use the Bridge Multicast Forward All page to attach ports or LAGs to a device
that is attached to a neighboring Multicast router/switch. After IGMP
Snooping is enabled, Multicast packets are forwarded to the appropriate port
or VLAN.
console(config-if)# bridge multicast address 0100.5e02.0203
add gi0/7,gi0/8
console(config-if)# end
console # show bridge multicast address-table
VLAN MAC Address Type Ports
---- ----------- ----- ----------
1 0100.5e02.0203 static gi0/5, gi0/6
Forbidden ports for multicast addresses:
VLAN MAC Address Ports
---- ----------- ----------
1 0100.5e02.0203 gi0/8
19 0100.5e02.0208 gi0/8
console # show bridge multicast address-table format ip
VLAN IP Address Type Ports
---- ----------- ----- ----------
1 224-239.130.2.2.3 static gi0/3, gi0/4
Forbidden ports for multicast addresses:
VLAN IP Address Ports
---- ----------- ----------
1 224-239.130.2.2.3 gi0/8