Gvrp parameters – Dell PowerEdge VRTX User Manual

Page 327

327

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User

Guide\Plasma_UGSwitching_VLAN.fm

D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY

The following is a sample of the CLI commands:

GVRP Parameters

GARP VLAN Registration Protocol (GVRP) is provided for automatic

distribution of VLAN membership information among VLAN-aware bridges.

GVRP enables VLAN-aware bridges to automatically learn VLANs-to-bridge-

ports mapping, without having to individually configure each bridge and

maximum number of GVRP VLANs equal to a value which significantly

exceeds:

–

The number of all static VLANs both currently configured and

expected to be configured.

–

The number of all dynamic VLANs participating in GVRP, both

currently configured (initial number of dynamic GVRP VLANs is 128)

and expected to be configured.

To set GVRP parameters:

1 Click Switching > VLAN > GVRP Parameters in the tree view to display

the GVRP Parameters: Summary page.

2 Enable/disable GVRP on the device in the GVRP Global Status field.
3 Check Ports and select either an External or Internal port to view ports on

the unit, or select LAGs to view the LAGs in the system.

4 To set GVRP for an interface, click Edit, and enter the fields:

–

Interface — Specifies port or LAG for editing GVRP settings.

–

GVRP State — Enable/disable GVRP on the interface.

–

Dynamic VLAN Creation — Enable/disable Dynamic VLAN creation

on the interface.

–

GVRP Registration — Enable/disable VLAN registration through

GVRP on the interface.

console (config-if)#

switchport general map protocols-

group

vlan