Dell PowerEdge VRTX - Manual (Page 141)

141
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Assigning Access Authentication Profiles Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the Select Authentication page.
The following is an example of the CLI commands that sets authentication
Table 6-37. Select Authentication CLI Commands
CLI Command Description
aaa authentication enable {default | list-
name } method [ method2 ...]}
no aaa authentication enable { default | list-
name }
Indicates the authentication
method list when accessing a
higher privilege level from a
remote Telnet, Console or SSH.
enable authentication [ default | list-name ]
no enable authentication
Specifies the authentication
method for accessing a higher
privilege level from a remote
Telnet or console.
Use the no form of this
command to restore the default
authentication method.
login authentication [ default | list-name ]
no login authentication
Indicates the login
authentication method list for a
remote Telnet, Console or SSH.
Use the no form of this
command to restore the default
authentication method.
ip http authentication aaa login-
authentication method1 [ method2... ]
no ip http authentication aaa login-
authentication
Indicates authentication
methods for HTTP or HTTPS
servers.
show authentication methods Displays information about the
authentication methods.