Dell PowerEdge VRTX - Manual (Page 169)

169
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Defining SNMP Views Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the View Settings pages.
The following is an example of CLI commands:
SNMP Access Control (Groups)
For ease of use, users may be assigned to groups. In this way, it is possible to
assign feature access rights to an entire group, instead of assigning them
individually to users. Users are created in the User Security Model pages.
Groups can be defined in any version of SNMP, but only SNMPv3 groups can
be assigned authentication methods.
Table 6-47. SNMP View CLI Commands
CLI Command Description
snmp-server view view-name
oid-tree {included | excluded}
no snmp-server view view-name
[oid-tree]
Creates or updates a SNMP server view
entry.
Use the no form of this command to
remove an SNMP server view entry.
show snmp views [viewname]
Displays the configuration of a view or all
views.
console(config)# snmp-server view user1 1 included
console(config)# end
console# show snmp views
Name OID Tree Type
------------ --------------- --------
user1 system included
Default iso included
Default snmpVacmMIB excluded
Default usmUser excluded
Default rndCommunityTab
le
excluded
DefaultSuper iso included