Dell PowerEdge VRTX - Manual (Page 66)

66
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Defining the Clock Source Using CLI Commands
The following table summarizes the CLI commands for setting the clock
source.
The following is an example of the CLI commands:
Manual Time Settings
This section describes how to set the system time manually on the device.
It contains the following topics:
• Setting System Time and Daylight Savings Time
• CLI Commands for Setting Manual Time
Table 6-4. Clock Source CLI Command
CLI Description
clock source sntp
no clock source
Configures an external time source for the
system clock.
Use the no form of this command to disable
the external time source.
show clock [detail]
Displays the time and date from the system
clock and its source.
console# configure
console(config)# clock source sntp
console# show clock detail
3:29:03 UTC Sep 7 2010
Time source is sntp
Time zone:
Offset is UTC+0