Dell PowerEdge VRTX - Manual (Page 240)

240
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_NetworkSecurity.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
dot1x timeout server-timeout
seconds
no dot1x timeout server-
timeout
Sets the time for the retransmission of
packets to the authentication server.
Use the no form of this command to
restore the default configuration.
dot1x timeout supp-timeout
seconds
no dot1x timeout supp-timeout
Sets the time for the retransmission of an
EAP request frame to the client.
Use the no form of this command to
restore the default configuration.
dot1x timeout tx-period
seconds
no dot1x timeout tx-period
Sets the number of seconds that the
device waits for a response to an EAP -
request/identity frame, from the client,
before resending the request.
Use the no form of this command to
restore the default configuration.
show dot1x [interface
interface-id | detailed]
Displays 802.1X status for the device or
for the specified interface.
show dot1x advanced
[interface interface-id |
detailed]
Displays 802.1X advanced features for the
switch or specified interface.
show dot1x users [username
username]
Displays 802.1X users for the device.
dot1x guest-vlan enable
no dot1x guest-vlan enable
Enables using a guest VLAN for
unauthorized ports.
Use the no form of this command to
restore the default configuration.
Table 7-13. Port-Based Authentication Interface CLI Commands (Continued)
CLI Command Description