Dell PowerEdge VRTX - Manual (Page 121)

121
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Viewing IPv6 Routes Table Parameters Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the IPv6 Routes Table page.
The following is an example of the CLI commands:
Domain Name System
The Domain Name System (DNS) converts user-defined domain names into
IP addresses. Each time a domain name is assigned, the DNS service
translates the name into a numeric IP address, for example,
www.ipexample.com is translated into 192.87.56.2. DNS servers maintain
domain name databases and their corresponding IP addresses.
To add a DNS server and specify the active DNS server:
1 Click System > IP Addressing > Domain Name System in the tree view
to display the Domain Name System: Summary page.
Table 6-28. IPv6 Routes Table CLI Commands
CLI Command Description
show ipv6 route [{Connected |
Static | ICMP | ND}]
Displays the current state of the ipv6
routing table.
console> show ipv6 route
Codes: L - Local, S - Static, I - ICMP, ND - Router
Advertisement
The number in the brackets is the metric.
S::/0 via fe80::77 [0] VLAN 1 Lifetime Infinite
ND::/0 via fe80::200:cff:fe4a:dfa8 [0] VLAN 1 Lifetime
1784 sec
L 2001::/64 is directly connected, g2 Lifetime Infinite
L 2002:1:1:1::/64 is directly connected, VLAN 1 Lifetime
2147467 sec
L 3001::/64 is directly connected, VLAN 1 Lifetime
Infinite
L 4004::/64 is directly connected, VLAN 1 Lifetime
Infinite
L 6001::/64 is directly connected, g2 Lifetime Infinite