Dell PowerEdge VRTX - Manual (Page 333)

333
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_VLAN.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Properties
To set voice VLAN parameters that apply to the voice VLAN on the device:
1 Click Switching > VLAN > Voice VLAN > Properties in the tree view to
display the Properties page.
2 Enter the fields:
– Voice VLAN State — Select Enable to use the Voice VLAN feature on
the device.
– Voice VLAN ID — Select the VLAN that is to be the voice VLAN.
– Class of Service — Select to add a CoS level to untagged packets,
received on the voice VLAN. The possible values are 0 to 7, where 7 is
the highest priority. 0 is used as a best-effort, and is invoked
automatically when no other value has been set.
– Remark CoS — Select Enable to use the Remark CoS feature.
– Voice VLAN Aging Time — Enter the interval of time after which the
port exits the voice VLAN, if no voice packets are received.
The aging time starts after the MAC address is aged out from the
Dynamic MAC Address table. The default time is 300 sec. For more
information on defining MAC address age out time, see "Dynamic
Addresses" on page 279.
Defining Voice VLAN Properties Using CLI Commands
The following table summarizes the CLI command for defining voice VLAN
properties .
Table 12-7. Voice VLAN Properties CLI Commands
CLI Command Description
voice vlan enable
no voice vlan enable
Enables automatic voice VLAN
configuration for a port.
Use the no form of this command to
disable automatic voice VLAN
configuration.