Dell PowerEdge VRTX - Manual (Page 254)

254
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Ports.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
• Short-Reach.
• Oper — Displays the operational status of Short-Reach mode.
• Fault Reason— Reason if the operational mode is different than
the administrative mode.
• Energy Detect.
•
Oper — Displays the operational status of Short-Reach mode.
• Fault Reason— Reason if the operational mode is different than
the administrative mode.
– Cable Length (Meter) — Indicates the length of the cable.
Configuring Green Ethernet Using CLI Commands
The following table summarizes the CLI commands for configuring Green
Ethernet.
Table 8-3. Green Ethernet CLI Commands
CLI Command Description
green-ethernet short-reach
no green-ethernet short-reach
Enables/disables Green Ethernet short
reach mode.
green-ethernet short-reach
force
no green-ethernet short-reach
force
Forces short-reach mode on an
interface.
Use the no form of this command to
return to the default.
green-ethernet short-reach
threshold cable-length
no green-ethernet short-reach
threshold
Set the maximum cable length for
applying short-reach mode.
Use the no form of this command to
return to the default.
green-ethernet power-meter
reset
Resets the power save meter.
eee enable
no eee enable
Enables the EEE mode globally. Can
be used globally or per interface.
Use the no format of the command to
disable the mode.