Dell PowerEdge VRTX User Manual
Page 242

242
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_NetworkSecurity.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
–
Reject Reason — Reason that traffic was rejected. See Table 7-14 for a
list of the possible reject reasons.
–
Time — Time that traffic was rejected.
Table 7-14. Reject Reason Description
Abbreviation
Description
ACL-DEL
ACL was deleted by a user.
ACL-NOTEXST
ACL sent by the RADIUS server does not exist on the device.
ACL-OVRFL
ACL sent by the RADIUS server cannot be applied because of
TCAM overflow.
AUTH-ERR
Rejected by RADIUS due to wrong user name or password in
the RADIUS server.
FLTR-ERR
RADIUS accept message contains more than two filter IDs.
FRS-MTH-DENY First method is deny.
IPv6WithMAC
RADIUS accept message contains filter with IPv6 DIP and
MAC addresses.
IPV6WithNotIP
RADIUS accept message contains IPv6 and not IP
simultaneously.
POL-BasicMode
Policy is not supported in the QoS basic mode.
POL-DEL
Policy was deleted by a user.
POL-OVRFL
Policy sent by radius server can not be applied because of
TCAM overflow.
RAD-APIERR
RADIUS API returned error (e.g. No RADIUS server is
configured).
RAD_INVLRES
RADIUS server returned invalid packet (e.g. EAP attribute is
missing).
RAD-NORESP
RADIUS server is not responding.
VLAN-DFLT
VLAN sent by a RADIUS server cannot be applied because it
is the default VLAN.
VLAN-DYNAM
VLAN sent by RADIUS server cannot be applied because it is
a dynamic VLAN.
VLAN-GUEST
VLAN sent by RADIUS server cannot be applied because it is
the Guest VLAN.