Dell PowerEdge VRTX - Manual (Page 84)

84
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
2 To add an interface that can receive SNTP server updates, click Add.
3 Select an interface and enable/disable State to indicate that the interface
can now receive/not receive SNTP server updates.
Defining SNTP Interface Settings Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the SNTP Interface Settings pages.
Table 6-10. SNTP Interface Settings CLI Commands
CLI Command Description
sntp client enable {interface-id}
no sntp client enable {interface-id}
Enables the SNTP client on an
interface in Global
Configuration mode for
Broadcast and Anycast clients on
an interface.
Use the no form of this
command to disable the SNTP
client.
sntp client enable
no sntp client enable
Enables SNTP client on an
interface in Global
Configuration or Interface
Configuration mode for
Broadcast and Anycast clients on
an interface.
Use the no form of this
command to disable the SNTP
client.
show sntp configuration
Shows the configuration of the
Simple Network Time Protocol
(SNTP).