Dell PowerEdge VRTX - Manual (Page 159)

159
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Defining RADIUS Servers Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed on the RADIUS pages.
Table 6-45. RADIUS Server CLI Commands
CLI Command Description
radius-server host {ipv4-address |
ipv6-address | ipv6z-address |
hostname} [auth-port auth-port-number]
[acct-port acct-port-number] [timeout
timeout] [retransmit retries]
[deadtime deadtime] [key key-string]
[source {source-ip}] [priority
priority] [usage {login | 802.1x |
all}]
no radius-server host {ip-address |
hostname}
Specifies a RADIUS server
host.
Use the no form of the
command to delete the
specified RADIUS server host.
radius-server timeout timeout-seconds
no radius-server timeout
Sets the interval for which a
device waits for a server host
to reply.
Use the no form of this
command to restore the
default configuration.
radius-server source-ip {source-ip-
address}
no radius-server source-ip {source-ip-
address}
Specifies the source IPv4
address that will be used for
the IPv4 communication with
RADIUS servers.
Use the no form of this
command to restore the
default configuration.
radius-server source-ipv6 {source}
no radius-server source-ipv6 {source}
Specifies the source IPv6
address that will be used for
the IPv6 communication with
RADIUS servers.
Use the no form of this
command to restore the
default configuration.