Dell PowerEdge VRTX - Manual (Page 379)

379
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_ARP.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
The following is an example of some of the CLI commands:
Dynamic ARP Inspection List
An ARP inspection list consists of entries where each entry is a pair of
MAC/IP addresses.
To create a new ARP inspection list and add the first entry to it:
1 Click Switching > Dynamic ARP Inspection > Dynamic ARP
Inspection List in the tree view to display the Dynamic ARP Inspection
List: Summary page.
The dynamic ARP lists are displayed.
2 To create a new list and enter the first address pair in it, click Add, and
enter the fields:
•
List Name — Create and enter a list name.
• IP Address — Enter the IP address that will be mapped to the MAC
address entered below.
• MAC Address — Enter the MAC address that will be mapped to the
IP address entered above.
ip arp inspection validate
no ip arp inspection
validate
Performs specific checks for dynamic ARP
inspection.
Use the no form of this command to
restore the default configuration.
ip arp inspection logging
interval {seconds |
infinite}
no ip arp inspection logging
interval
Sets the minimum time interval between
successive ARP SYSLOG messages.
Use the no form of this command to
restore the default configuration.
console(config)# ip arp inspection
console(config)# ip arp inspection validate
Table 16-1. ARP Inspection Global Settings CLI Commands (Continued)
CLI Command Description