Dell PowerEdge VRTX - Manual (Page 167)

167
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
The following is an example of the CLI commands:
SNMP View Settings
An SNMP view, which is a collection of MIB subtrees, provides or blocks
access to device features.
Each subtree is defined by the Object ID (OID) of the root of its subtrees. In
extreme cases this subtree can be a leaf. Well-known names can be used to
specify the root of the desired subtree, or an OID can be entered (see "SNMP
Global Parameters" on page 164).
Each subtree is either included in or excluded from the view being defined.
Views can be attached to groups in the Access Control pages.
To create an SNMP view:
1 Click System > SNMP > View Settings in the tree view to display the
View Settings: Summary page.
2 Select a view name. Its subtrees are displayed.
3 To remove a subtree from an SNMP view, click Remove. The subtrees of
the default views (Default, DefaultSuper) cannot be changed.
4 To add a new view, click Add, and enter a new View Name (1-30
Characters).
5 To complete the definition of the view, click Edit, and select a View Name
to modify. Enter the fields:
–
New Object ID Subtree — Check to specify the device feature OID
included or excluded in the selected SNMP view.
console(config)# snmp-server enable traps
console(config)# snmp-server trap authentication
console(config)# snmp-server engineid local default
The engine-id must be unique within your
administrative domain.
Do you wish to continue? [Y/N]y
The SNMPv3 database will be erased. Do you wish to
continue? [Y/N]y