Dell PowerEdge VRTX - Manual (Page 239)

239
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_NetworkSecurity.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
dot1x radius-attributes vlan
[reject | vlan-id]
no dot1x radius-attributes
vlan
Enables user-based VLAN assignment.
Use the no form of this command to
disable user-based VLAN assignment.
dot1x guest-vlan enable
no dot1x guest-vlan enable
Enables unauthorized users on the
interface access to the guest VLAN.
Use the no form of this command to
disable access.
dot1x max-req count
no dot1x max-req
Sets the maximum number of times that
the device sends an EAP to the client,
before restarting the authentication
process.
Use the no form of this command to
restore the default configuration.
dot1x re-authentication
no dot1x re-authentication
Enables periodic re-authentication of the
client.
Use the no form of this command to
return to the default setting.
dot1x timeout re-auth-period
seconds
no dot1x timeout reauth-
period
Sets the number of seconds between re-
authentication attempts.
Use the no form of this command to
restore the default configuration.
dot1x re-authenticate
[interface-id]
Manually initiates a re-authentication of
all 802.1X-enabled ports or the specified
802.1X-enabled port.
dot1x timeout quiet-period
seconds
no dot1x timeout quiet-period
Sets the number of seconds that the
device remains in the quiet state following
a failed authentication exchange.
Use the no form of this command to
restore the default configuration.
Table 7-13. Port-Based Authentication Interface CLI Commands (Continued)
CLI Command Description