Dell PowerEdge VRTX - Manual (Page 122)

122
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
The list of previously-defined DNS servers is displayed.
2 Enter the following fields:
– DNS Status—Select Enable to enable mapping of host names into IP
addresses through a DNS server.
– Domain Name Query Interval(20-3600)— Enter how often DNS
queries will be sent.
3 To activate one of the currently-defined DNS servers, enable Active Server.
4 To add a DNS server, click Add, and enter the fields:
– Supported IP Format — Select whether the IPv4 or IPv6 format is
supported.
– IPv6 Address Type — When the server supports IPv6, this specifies
the type of static address supported. The possible options are:
•
Link Local — A Link Local address that is non-routable and used
for communication on the same network only.
• Global — A globally unique IPv6 address; visible and reachable
from different subnets.
– Link Local Interface — When the server supports an IPv6 Link Local
address, this specifies the Link Local interface. The possible options
are:
•
VLAN 1 — The VLAN on which the IPv6 interface is configured.
• ISATAP — The IPv6 interface is configured on an ISATAP
tunnel.
– DNS Server — Enter the IP address of the DNS server being added.
– DNS Server Currently Active — Displays the DNS server that is
currently active.
– Set DNS Server Active — Check to activate the selected DNS server.