Dell PowerEdge VRTX - Manual (Page 189)

189
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Auto Update Configuration Using CLI Commands
The following table summarizes the CLI commands for setting fields
displayed in the Auto Update of Configuration/Image File page.
The following is an example of the CLI command to view the Auto-Update
Table 6-53. Auto Update of Configuration/Image File CLI Commands
CLI Command Description
boot host auto-config
no boot host auto-config
Enables the support of auto-
configuration via DHCP.
Use the no form of this command to
disable DHCP auto configuration.
boot host auto-update
no boot host auto-update
Enables the support of auto-update via
DHCP.
Use the no form of this command to
disable DHCP auto configuration
boot host dhcp
no boot host dhcp
Forces the mechanism used to
download a configuration file at the
next system startup.
Use the no form of this command to
restore the host configuration file to the
default.
boot host auto-save
no boot host auto-save
Enables automatic saving of Running
configuration in Startup configuration
after download.
Use the no form of this command
restore default behavior
show boot
Shows the status of the IP DHCP Auto
Config process.