Dell PowerEdge VRTX - Manual (Page 245)

245
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_NetworkSecurity.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
– Action on Single Host Violation — Select the action to be applied to
packets arriving in Single Session/Single Host mode, from a host
whose MAC address is not the supplicant MAC address. The options
are:
• Discard — Discard the packets from any unlearned source.
•
Forward — Forward the packets from an unknown source,
however, the MAC address is not learned.
• Shutdown — Discard the packet from any unlearned source and
shut down the port. Ports remain shutdown until they are
activated, or the switch is reset.
Host Authentication pages:
Table 7-16. Host Authentication CLI Commands
CLI Command Description
dot1x host-mode {multi-host |
single-host | multi-sessions}
Allows a single host (client) or multiple
hosts on an IEEE 802.1x-authorized port.
dot1x traps mac-
authentication failure
no dot1x traps mac-
authentication failure
Enables sending traps when a MAC
address is successfully authenticated by
the 802.1X mac-authentication access
control.
Use the no form of this command to
disable the traps.
dot1x traps mac-
authentication success
no dot1x traps mac-
authentication success
Enables sending traps when MAC address
was failed in authentication of the 802.1X
MAC authentication access control.
Use the no form of this command to
disable the traps.
dot1x violation-mode
{restrict | protect |
shutdown}
no dot1x violation-mode
Configures the action to be taken, when a
station whose MAC address is not the
supplicant MAC address, attempts to
access the interface.
Use the no form of this command to
return to default.
show dot1x advanced
[interface-id | detailed]
Displays 802.1x advanced features for the
device or specified interface.