Dell PowerEdge VRTX - Manual (Page 278)

278
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_AddressTables.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
2 To add a static address, click Add.
3 Enter the following fields:
• Interface — Select a port or LAG for the entry.
• MAC Address — Enter the interface MAC address.
• VLAN ID — Check and select the VLAN ID for the port.
or
• VLAN Name — Check and enter the VLAN name.
• Status — Select how the entry in the table will be treated. The
possible options are:
•
Permanent — The MAC address is never aged out of the table
and, if it is saved to the Startup Configuration, it is retained after
rebooting.
• Delete on Reset — The MAC address is deleted when the device
is reset.
• Delete on Timeout — The MAC address is deleted when a
timeout occurs.
• Secure — The MAC address is secure when the interface is in
classic locked mode.
To prevent Static MAC addresses from being deleted when the Ethernet
device is reset, ensure that the port attached to the MAC address is locked.
Configuring Static Addresses Using CLI Commands
The following table summarizes the CLI commands for configuring static
address parameters as displayed in the Static Address Table pages.
Table 9-1. Static Address CLI Commands
CLI Command Description
mac address-table static mac-
address vlan vlan-id interface
interface-id [permanent | delete-
on-reset | delete-on-timeout
|secure]
no mac address-table static [mac-
address] vlan vlan-id
Adds a MAC-layer station source
address to the MAC address
table.
Use the no form of this
command to delete the MAC
address.