Dell PowerEdge VRTX - Manual (Page 455)

455
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGQoS.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
3 Select an aggregate policer in the Aggregate Policer Name field.
Defining Aggregate Policer Statistics Using CLI Commands
The following table summarizes the CLI commands for setting the fields in
the Aggregate Policer Statistics pages.
The following is an example of the CLI commands:
Queues Statistics
Queue statistics include statistics of forwarded and dropped packets, based
on interface, queue, and drop precedence. Lowest drop precedence has the
lowest probability of being dropped.
To view Queue Statistics:
1 Click Quality of Service QoS Statistics Queues Statistics to display
the Queues Statistics: Summary.
The statistics for previously-defined counters are displayed.
–
Counter Set —Number of counter.
– Port —Number of port.
– Queue —Number of queue.
– Total Packets —Number of packets forwarded or tail dropped.
– Tail Drop Packets —Percentage of packets that were tail dropped.
Table 19-19. Aggregate Policer Statistics CLI Commands
CLI Command Description
qos statistics aggregate-policer
aggregate-policer-name
no qos statistics aggregate-
policer aggregate-policer-name
Enables counting in-profile and
out-of-profile bytes vis-a-vis an
aggregate policer.
Use the no form of this command
to disable counting.
clear qos statistics
Clears the statistics
show qos statistics
Displays the statistics
console (config)# qos statistics aggregate-policer policer1