Dell PowerEdge VRTX - Manual (Page 33)

Hardware and Initial Configuration 33
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGHW&InitialConfiguration.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Table 3-4 describes the major switch defaults:
Table 3-4. Major System Defaults
Feature Defaults
SNMP Enabled.
SNMP version: V3
SNMP Local Engine ID: 0000000001
SNMP Notifications: Enabled
Login and Authentication Telnet authentication login is from the local
user data base
HTTP authentication login is from the
local data base
HTTPS authentication login is from the
local data base
Authentication Servers No RADIUS server is defined
No TACACS server is defined
Logging No SYSLOG server is defined
System Time SNTP is supported
DHCP DHCP server is disabled
DHCP auto configuration is enabled
Ports 24 GE regular ports
Full duplex is enabled.
Negotiation is enabled
Flow control is Off
No LAGs are defined
Multicast Multicast filtering is disabled
IGMP Snooping Disabled
Spanning Tree Enabled
VLANs Default VLAN is enabled
Default VLAN ID is 1
IP Addressing IP address is 192.168.2.1