Dell PowerEdge VRTX User Manual

Page 194

194

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User

Guide\Plasma_UGSystemConfig.fm

D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY

3 Select a Firmware/Configuration option. The possible options are:

–

Firmware Download — A firmware file is downloaded.

–

Configuration Download — A configuration file is downloaded.

4 Select Download via TFTP to download firmware or a configuration file

via a TFTP server in Download Protocol.

5 If the Firmware Download option was selected, enter the following:

–

Server IP Address — The IP address of the server from which the

firmware file is downloaded.

–

Source File Name (1-64 characters) — The file to be downloaded.

–

Destination File Type — The destination file type to which the file is

downloaded. The possible options are:
•

Software Image — Downloads the Image file. The image file

overwrites the non-active image. It is recommended to designate

that the non-active image becomes the active image after reset,

and then to reset the device following the download. During the

Image file download a dialog box opens that displays the

download progress. The window closes automatically when the

download is complete.

• Boot Code — Downloads the Boot file.

6 If the Configuration Download option was selected, enter the following:

–

Server IP Address — The TFTP server IP address from which the

configuration files are downloaded.

–

Source File Name (1-64 characters) — The configuration file to be

downloaded.

–

Destination File Name — The destination file to which the

configuration file is downloaded. The possible options are:
•

Running Configuration — Check to download commands into

the Running Configuration file. The current file is overwritten.

•

Startup Configuration — Check to download commands into the

Startup Configuration file. The current file is overwritten.

•

New File Name (1-64 characters) — Check to download

commands into a configuration backup file. Enter the filename.

7 Click Activate to start the download process.