Dell PowerEdge VRTX - Manual (Page 178)

178
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Configuring Notification Filters Using CLI Commands
The following table summarizes CLI commands for defining fields displayed
in the Notification Filter pages.
The following is an example of CLI commands:
SNMP Notification Recipients
An SNMP notification is a trap message, sent from the switch to the SNMP
management station, indicating that a certain event has occurred, such as a
link up or down.
Trap receivers, also known as notification recipients, are network nodes to
which trap messages are sent by the switch.
A trap receiver entry contains the IP address of the node and the SNMP
credentials corresponding to the version that will be included in the trap
message. When an event arises that requires a trap message to be sent, it is
Table 6-51. SNMP Notification Filter CLI Commands
CLI Command Description
snmp-server filter filter-name oid-
tree {included | excluded}
no snmp-server filter filter-name
[oid-tree]
Creates or updates an SNMP
notification filter.
Use the no form of this
command to remove the
specified SNMP server filter
entry.
show snmp filters [filter-name]
Displays the configuration of
SNMP notification filters
console (config)# snmp-server filter user1 iso
included
console(config)# end
console # show snmp filters
Name OID Tree Type
----------- ------------- --------
user1 iso Included