Dell PowerEdge VRTX - Manual (Page 235)

235
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_NetworkSecurity.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
The following is an example of the CLI commands:
Port-Based Authentication Interface Settings
To configure 802.1x authentication on an interface:
1 Click Switching > Network Security > Dot1 Authentication > Port
Based Authentication Interface Settings to display the Port Based
Authentication Interface Settings: Summary page.
Port parameters for the selected unit are displayed.
2 Click Edit.
3 Select a port for which the authentication parameters apply in the
Interface drop-down list.
dot1x system-auth-control
monitor [vlan vlan-id]
no dot1x system-auth-control
monitor
Enables 802.1x globally the 802.1x
Monitoring mode and define the Monitor
VLAN.
Use the no format of the command to
return to default.
dot1x guest-vlan
no dot1x guest-vlan
Contains a list of VLANs. The guest
VLAN is selected from the VLAN List.
Use the no form of this command to
disable access.
show dot1x [interface
interface-id | detailed]
Displays 802.1X status for the device.
console(config)# aaa authentication dot1x default none
console(config)# interface vlan 5
console# show dot1x
802.1x is disabled
Admin Oper Reauth Reauth Username
Port Mode Mode Control Period
-------- ------------------ ------------- -------- ------- --------
gi0/1 Force Authorized Authorized* Disabled 3600 n/a
gi0/2 Force Authorized Authorized* Disabled 3600 n/a
gi0/3 Force Authorized Authorized* Disabled 3600 n/a
gi0/4 Force Authorized Authorized* Disabled 3600 n/a
Table 7-12. Port-Based Authentication Global CLI Commands (Continued)
CLI Command Description