Dell PowerEdge VRTX - Manual (Page 181)

181
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Configuring SNMP Notification Recipients Using CLI Commands
The following table summarizes the CLI commands for setting fields in the
Notification Recipients pages.
The following is an example of the CLI commands:
Table 6-52. SNMP Notification CLI Commands
CLI Command Description
snmp-server host {host-ip |
hostname} [traps | informs]
[version {1 |2c | 3 [auth | noauth
| priv]}] community-string [udp-
port port] [filter filtername]
[timeout seconds] [retries
retries]
no snmp-server host {ip-address |
hostname} [traps | informs]
[version {1 | 2c | 3}]
Creates or updates a notification
recipient receiving notifications in
SNMP version 1, 2 or 3.
Use the no form of this command to
remove the specified host.
show snmp
Shows the current SNMP
configuration.
console(config)# snmp-server host 172.16.1.1 private
console(config)# end
console# show snmp
Community-
String
Community-
Access
View Name IP Address
------------- ------------ --------- ----------
public read only user-view All
private read write default 172.16.1.1
private su DefaultSu
per
172.17.1.1