Dell PowerEdge VRTX - Manual (Page 126)

126
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 1 8 /1 3 - F O R P R O O F O N LY
Mapping IP Addresses to Domain Host Names Using the CLI Commands
The following table summarizes the CLI commands for mapping domain
host names to IP addresses.
The following is an example of the CLI commands:
ARP
The Address Resolution Protocol (ARP) converts IP addresses into physical
MAC addresses. ARP enables a host to communicate with other hosts when
their IP addresses are known.
To add an IP/MAC address mapping:
1 Click System > IP Addressing > ARP in the tree view to display the ARP:
Summary page.
The entries in the table are displayed.
2 Enter the parameters:
• ARP Entry Age Out (1 - 40000000) — Enter the amount of time in
seconds that can pass between ARP requests for this address. After
this period, the entry is deleted from the table.
• Clear ARP Table Entries — Select the type of ARP entries that are
cleared on all devices. The possible options are:
•
None — ARP entries are not cleared.
• All — All ARP entries are cleared.
Table 6-31. Domain Host Name CLI Commands
CLI Command Description
ip host name address
[address2 address3
address4]
Defines the static host name-to-address mapping in
the host cache
no ip host name
Removes the name-to-address mapping.
clear host {name|*}
Deletes entries from the host name-to-address cache.
show hosts [name]
Displays the default domain name, list of name server
hosts, the static and the cached list of host names and
addresses.
console(config)# ip host accounting.abc.com 176.10.23.1