Dell PowerEdge VRTX - Manual (Page 353)

353
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Multicast.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
To enable IGMP Snooping on a VLAN:
1 Click Switching Multicast Support IGMP Snooping in the tree view
to display the IGMP Snooping page.
The IGMP snooping information for the VLANs on the switch is
displayed.
2 To enable IGMP Snooping on a VLAN, click Edit and select the VLAN
from the VLAN ID drop down menu.
3 Enter the fields:
• IGMP Snooping Status — Enable/disable the monitoring of network
traffic to determine which hosts have asked to be sent Multicast
traffic. The switch performs IGMP snooping only if IGMP snooping
and Bridge Multicast filtering are both globally enabled.
• Operational IGMP Snooping Status — Displays whether IGMP
Snooping is enabled.
• MRouter Ports Auto Learn — Enables or disables auto learning of the
ports to which the Mrouter is connected.
• Query Robustness (1-7) — Enter the Robustness variable value to be
used. The Robustness value enables tuning for the expected packet
loss on a link. If a link is expected to have losses, the Robustness Value
may be increased.
• Operational Query Robustness — Displays the robustness variable
sent by the elected querier.
• Query Interval (30-18000) — Enter the interval between general
queries sent by the querier.
• Operational Query Interval — The time interval in seconds between
general queries sent by the elected querier
• Query Max Response Interval (5-20) — Enter the amount of time in
which a host should respond to a query.
• Operational Max Response Interval — Displays the actual delay.
• Last Member Query Counter (1-7) — Enter the number of IGMP
group-specific queries sent before the switch assumes there are no
local members. To use the default, check Use Default.