Dell PowerEdge VRTX - Manual (Page 171)

171
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Defining SNMP Access Control Using CLI Commands
The following table summarizes the CLI commands for defining fields
displayed in the Access Control pages.
The following is an example of the CLI commands:
SNMP User Security Model (Users)
An SNMP user is defined by the following:
• Login credentials (username, password, and authentication method)
Table 6-48. SNMP Access Control CLI Commands
CLI Command Description
snmp-server group groupname {v1
| v2 | v3 {noauth | auth | priv}
[notify notifyview]} [read
readview] [write writeview]
no snmp-server group groupname
{v1 | v2 | v3 [noauth | auth |
priv]}
Configure a new Simple Network
Management Protocol (SNMP)
group, or a table that maps SNMP
users to SNMP views.
Use the no form of this command to
remove a specified SNMP group.
show snmp groups [groupname]
Displays the configuration of groups
console (config)# snmp-server group user-group v3
priv read user-view
console# show snmp groups
Name Security Views
Model Level Read Write Notify
----- ----- ------- ------- ------- --------
--
1 V1 noauth - - -
2 V1 noauth - - -
3 V1 noauth - - -
4 V1 noauth - - -
5 V1 noauth - - -