Dell PowerEdge VRTX - Manual (Page 201)

201
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSystemConfig.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Copying Files Using CLI Commands
The following table summarizes the CLI commands for performing actions
provided by the Copy Files page.
The following is an example of the CLI commands:
File System
Use the File System page to view information about files currently stored on
the system, including file names, file sizes, files modifications, and file
permissions. The files system permits managing up to two user-defined
backup configuration files.
To view information about files:
Table 6-57. Copy Files CLI Commands
CLI Command Description
copy source-url destination-url
Copies any file from a source to a
destination.
delete startup-config
Deletes the startup-config file.
delete url
Deletes a file from the FLASH
memory device.
console# delete startup-config
Delete startup-config [y/n]? y
console# 01-Oct-2006 16:10:51 %FILE-I-DELETE: File
Delete - file URL flash://startup-config
console# copy running-config startup-config
Overwrite file [startup-config] ?[Yes/press any key
for no]....01-Oct-2006 16:11
:47 %COPY-I-FILECPY: Files Copy - source URL running-
config destination URL flash://startup-config
01-Oct-2006 16:12:01 %COPY-N-TRAP:
The copy operation was completed successfully
Copy succeeded