Dell PowerEdge VRTX - Manual (Page 443)

443
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGQoS.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
2 To add a class map, click Add.
A new class map is added by selecting one or two ACLs and assigning them
a class map name. If a class map has two ACLs, specify that a frame must
match both ACLs, or that it must match either one or both of the ACLs
selected.
3 Enter the parameters.
– Class Map Name — Enter the name of a new class map.
– Match ACL Type — Enter the criteria that a packet must match in
order to belong to the flow defined by the class map. The possible
options are:
•
IP — A packet must match either of the IP-based ACLs in the
class map.
• MAC — A packet must match the MAC-based ACL in the class
map.
• IP and MAC — A packet must match the IP-based ACL and the
MAC-based ACL in the class map (match-all).
• IP or MAC — A packet must match either the IP-based ACL or
the MAC-based ACL in the class map (match-any).
– IP ACL — Select the IPv4-based ACL or the IPv6-based ACL for the
class map.
– MAC ACL — Select the MAC-based ACL for the class map.
– Preferred ACL — Select whether packets are first matched to an
IP-based ACL or a MAC-based ACL.