Multicast tv vlan mapping – Dell PowerEdge VRTX User Manual
Page 361

361
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Plasma\User
Guide\Plasma_UGSwitching_Multicast.fm
D E L L CO N F I D E N T I A L – P R E L I MI N A RY 4/ 1 8 /1 3 - F O R PR O O F O N LY
Displaying Multicast TV VLAN Membership Using CLI Commands
The following table summarizes the CLI command for displaying Multicast
TV VLAN membership:
The following is an example of the CLI commands:
Multicast TV VLAN Mapping
To set the Multicast Group IP address for a TV VLAN:
1 Click Switching > Multicast Support > Multicast TV VLAN Mapping
in the tree view to display the Multicast TV VLAN Mapping: Summary
page.
The Multicast Group IP addresses for the selected TV VLAN are displayed.
2 To add the Multicast Group IP address for a VLAN, click Add, and enter
the fields:
•
VLAN ID — Enter a VLAN ID.
•
Multicast Group IP Address — Enter the Multicast group IP address
for which the IGMP Snooping is enabled.
Table 14-7. Multicast TV VLAN Membership CLI Commands
CLI Command
Description
show vlan multicast-tv
vlan vlan-id
Displays information on the source ports and
receiver ports of multicast-TV VLAN.
console # show vlan multicast-tv vlan 1
Source Ports
-------------------------------------
gi0/8, gi0/4
Receiver Ports
-------------------------------------
gi2/1-4, gi3/1-4, gi4/1-4